Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B

Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
  • Original PriceUS$21.99piece
  • SAVEUS $6piece
  • Discount PriceUS$15.99piece
  • ShippingFree Shipping
  • Product Rating4816

Shopping for a Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B with low price? Read about features, types, and other must-know topics in our Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B buying guide to make an informed choice. Buy greatest Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B Look for the Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B package that is greatest for you. Make a price comparison, discount promo, or free shipping before buying.

Introduction :
Sometimes you use the the Raspberry Pi with 3.5 inch touchscreen , but sometime you don't use them together. In this situation , you need a case which both suitable for Raspberry Pi alone or with 3.5 inch touchscreen. This is the reason we provide this new case -- for the people use 3.5 inch screen more convenient: When you use the touchscreen , just remove the cover board and fan; When you don't use the touchscreen , you can use the cover and fan , which become a normal case.
Please note that you can't use the 3.5 inch touchscreen and cooling fan at the sametime !

Features :
1. One case for two use :
​1). This case suport install 3.5 inch touchscreen , and need to remove the cover board and can't use the fan in this using way.
2). When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan.
2. Full access for Raspberry Pi :
We leave every hole for SD card , HDMI , AV , Ethernet , USB , POE , Camera , MIPI DSI ports.
3. Support cooling fan :
You can install the cooling fan on the cover board , which make the best heat dissipation and extend the using life of Raspberry Pi.
( You can't use the 3.5 inch touchscreen and cooling fan at the sametime ! )
4. Hange hole on the bottom :
We make 2 hole on the bottom so that you can hange the case on the wall or something else .
This design is very convenient when using the 3.5 inch touchscreen.

-480×320 pixel resolution, better display.
-Driverprovided (works with custom Raspbian directly).
-Supports any revision of Rasp Pi (directly-pluggable).
-Designed for Raspberry Pi, an ideal alternative solution for monitor.
-Support software keyboard (system interaction without keyboard/mouse).
-Provides the best available protection/accessibility for Model B
, Protect and secure your Rasp Pi from shocks, scratches and dust.
How to install the 3.5 inch touchscreen :
1). Install the Raspberry Pi on the base board
2). ​Please stick the pad on the back of 3.5 inch touchscreen , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed )
3). Install the cover board

Parameter:

LCD TypeTFT
LCD InterfaceSPI
Touch Screen TypeResistive
Touch Screen ControllerXPT2046
Colors65536
BacklightLED
Resolution320*480 (Pixel)
Aspect Ratio8:5
Power ConsumptionTBD
Backlight CurrentTBD
Operating Temp. (Centigrade)TBD

Interface Definition:

PIN NO.SYMBOLDESCRIPTION
1, 173.3VPower positive (3.3V power input)
2, 45VPower positive (5V power input)
3, 5, 7, 8, 10, 12, 13, 15, 16NCNC
6, 9, 14, 20, 25GNDGround
11TP_IRQTouch Panel interrupt, low level while the Touch Panel detects touching
18LCD_RSInstruction/Data Register selection
19LCD_SI / TP_SISPI data input of LCD/Touch Panel
21TP_SOSPI data output of Touch Panel
22RSTReset
23LCD_SCK / TP_SCKSPI clock of LCD/Touch Panel
24LCD_CSLCD chip selection, low active
26TP_CSTouch Panel chip selection, low active

About the system of 3.5 touch screen

The touch screen need to configure the driver for touch function , otherwise you can not use it by your own system.
Here we provide the method to configure for Raspbian system :

Step 1: Download the Raspbian IMG
Step 2: Burn the system image
If you don't know how to do that,you can refer to the Raspberry Pi office tutorial
Step 3: Open terminal(SSH) and install the driver on RaspberryPi
(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Drive File:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

Make sure your RPI connects to the internet then wait a few minutes, when the system reboot ok, you can see that.


You can also download the system image which we already configured well by following links :

1. for Raspberry Pi 3 :
https://mega.nz/#!vc4zjRRR!A9OMnL4tVjXUwH5Tt4T0ES2WxJyA4DGUg-gid_JHQVA

2. for Raspberry Pi 3 Modle B+ :
https://mega.nz/#!SQRl3BSS!ZwuE1VsoQSpUwHm2sa6zk1GPsU36M7793Q35NvdSYVY

or refer to configure it by this link :
https://github.com/goodtft/LCD-show


Package included:

1 x 3.5 inch Touch Screen
1 x Protective Case
1 x Touch Pen



Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B
Geekcreit® 3.5 inch TFT LCD Touch Screen + Protective Case Support Cooling Fan + Touch Pen Kit For Raspberry Pi 3B+/3B/2B

Feedback
We would be very grateful to leave you some comments when you receive your article. We do our best to provide the best possible service, but if for any reason you are unhappy with something, please contact us before leaving a negative answer and we will do our best to solve your problem.

MERCI DE CHOISIR D'ACHETER AVEC NOUS